Electrolux EOB8857AAX Bedienungsanleitung PDF herunterladen (Seite 22)

9. USING THE ACCESSORIES

WARNING!

Refer to Safety chapters.

9.1 Core temperature sensor

There are two temperatures to be set:

the oven temperature and the core

temperature.

The core temperature sensor measures

the core temperature of the meat. When

the meat is at the set temperature, the

appliance deactivates.

CAUTION!

Only use the core

temperature sensor supplied

or the correct replacement

parts.

The core temperature

sensor must stay in the meat

and in the socket during the

cooking.

1. Activate the appliance.

2. Put the tip of the core temperature

sensor into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket at the front of

the appliance.

The display shows the core temperature

sensor symbol.

4. Press or in less than 5

seconds to set the core temperature.

5. Set the heating function and, if

necessary, the oven temperature.

The appliance calculates an approximate

end time. The end time is different for the

different quantities of the food, the set

oven temperatures (minimum 120 °C)

and the operating modes. The appliance

calculates the end time in approximately

30 minutes.

6. To change the core temperature,

press .

When the meat is at the set core

temperature, an acoustic signal sounds.

The appliance deactivates automatically.

7. Touch any symbol to stop the signal.

8. Remove the core temperature sensor

plug from the socket and remove the

meat from the oven.

WARNING!

The core temperature

sensor is hot. There is a risk

of burns. Be careful when

you remove the tip and the

plug of the core temperature

sensor.

9.2 Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

Deep pan:

Push the deep pan between the guide

bars of the shelf support.

www.electrolux.com22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare