Electrolux E30DF74EPS Spezifikationen PDF herunterladen (Seite 31)

Professional Series Range LPG Conversion Kit

7-1 Remove the two screws that hold the left rear

burner base to the stove chassis.

7-2 Hold the shutter connector with the 8"

adjustable wrench. Remove the air shutter using

the 6" adjustable wrench.

7-3 Hold the shutter connector with the 8"

adjustable wrench. Remove the main orifice

from the shutter connector using the 10 mm

open-end wrench.

7-4 Replace the main orifice with the appropriate

size from Table 7-1, Match both the model

number and the burner location. The main

orifice size is stamped on its side, The shutter

and the burner base will be re-assembled after

pressure testing,

7-5 Check to make sure that the compression nut is

tightened into the back of the shutter connector.

7-6 Repeat steps 7-1 through 7-5 for the remaining

burners.

Burner E30DF74EPS E36DF76EPS E4BDF76EPS

Location _30-Inch) _36-Inch) _48-Inch)

Left Rear 84 112 112

Left Front 111 86 86

Right Rear 111 86 86

Ricjht Front 118 112 112

Center Rear 118 118

Center Front 118 118

Table 7-1 Main Orifice Sizes (X 100 mrn)

Compression Nut

Main Orifice

Shutter Connector

Air Shutter (remove)

Burner Base

Fiqure 7-1 Main Orifice Conversion

Page 7

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Electrolux E30DF74EPS Spezifikationen Seite 31