Electrolux E30DF74EPS Spezifikationen PDF herunterladen (Seite 9)

for

@ASANDELECTRiCaLR@U@Ho H

[] [] m m [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []

A manual shut valve must be installed in the gas piping, external to the appliance,

for the purpose of turning on or shutting off gas to the appliance. Plan the location

of the range and the gas supply to allow access to the valve when the unit is

installed. Access to the remote circuit breaker panel/fuse box, with the range in

place, must also be allowed for in the installation. Any openings in the wall behind

the appliance and in the floor under the appliance must be sealed.

Both the gas supply piping and shut-off valve, and the electrical junction box/

receptacle must be located so they do not interfere with the range when it is

installed. In addition, the junction box must be located so the range can be removed

for service when the conduit supplied with the unit is attached to the junction box.

Do not lengthen the conduit or wiring provided with the range.

All dimensions shown are based on standard American cabinets 36 inches

(914mm) high at the finished countertop by 24 inches (610mm) deep, with a 25

inch (635mm) overall countertop depth. When installing the range into nonstandard

cabinets, minimum clearances shown in the diagrams on page 11 must be

maintained.

Carefully check the location where the range is to be installed. For best

performance, the range should be placed away from drafts that may be caused by

doors, windows and HVAC outlets.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Keine Kommentare

Electrolux E30DF74EPS Spezifikationen Seite 9