Electrolux EKC60751X Bedienungsanleitung PDF herunterladen (Seite 10)

9

Electrical connections

Any work required on the cooker

must be carried out by a

QUALIFIED

EXPERT

. Work carried out by non-

qualified people can impair the

cooker and cause injury to people

and/or damage to property.

The electrical installation is to include a

device whereby it is possible to separate all

the poles of the equipment from the power

supply, with a contact opening of at least

3 mm.

This requirement must be satisfied for

safety reasons.

The connected rating and voltage are

shown on the data plate. There is a wiring

diagram on the back of the cooker.

Base trim (optional accessory)

CAUTION! Take due care when

fitting the base trim to the cooker.

Edges which you do not normally

come into contact with can be sharp.

IMPORTANT

!

ONLY

FITS

COOKERS

WITH

A

HEIGHT

OF

900

MM

.

Remove the protective film before fitting the

base trim.

1 Remove the drawer from the cooker

by lifting it diagonally upwards and

then pulling it all the way out.

2 Fit the base trim by pressing it firmly

onto the plinth (snap attachment, no

tools needed).

3 Replace the drawer.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare