Electrolux GHGL4046CN Bedienungsanleitung PDF herunterladen (Seite 25)

Before activating the

catalytic cleaning remove all

the accessories from the

oven.

The walls with a catalytic coating are

self-cleaning. They absorb fat which

collects on the walls while the appliance

operates.

To support the self-cleaning procedure,

heat the empty oven on a regular basis.

1. Clean the oven floor with warm water

and washing up liquid, then dry it.

2. Set the maximum temperature and

let oven operate for 1 hour.

3. Set the oven temperature to 250 °C

and let the oven operate for 1 hour.

4. When the appliance is cool, clean it

with a soft and moist sponge.

11.6 Oven ceiling

WARNING!

Deactivate the appliance

before you remove the

heating element. Make sure

that the appliance is cold.

There is a risk of burns.

Remove the shelf supports.

You can remove the heating element to

clean the oven ceiling more easily.

1. Remove the screw which holds the

heating element. For the first time,

use a screwdriver.

2. Carefully pull the heating element

down.

3. Clean the oven ceiling with a soft

cloth with warm water and a cleaning

agent, and let it dry.

Install the heating element in the

opposite sequence.

Install the shelf supports.

WARNING!

Make sure that the heating

element is correctly installed

and that it does not fall

down.

11.7 Removing and installing

the door

You can remove the door to clean it.

WARNING!

Be careful when you remove

the door from the appliance.

The door is heavy.

1. Open the door fully.

2. Fully press the clamping levers (A)

on the two door hinges.

A

A

3. Close the door until it is at an angle

of approximately 45°.

ENGLISH 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare