Electrolux GHGL4046CN Bedienungsanleitung PDF herunterladen (Seite 26)

45°

4. Hold the door with one hand on each

side and pull it away from the

appliance at an upwards angle.

5. Put the door with the outer side down

on a soft cloth on a stable surface.

This is to prevent scratches.

6. Clean the glass panel with water and

soap. Dry the glass panel carefully.

When the cleaning is completed, install

the door. Do the above steps in the

opposite sequence.

11.8 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

CAUTION!

Always hold the halogen

lamp with a cloth to prevent

grease residue from burning

on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a halogen,

230 V, 40 W, 300 °C heat resistant

lamp.

4. Install the glass cover.

12. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

12.1 What to do if...

Problem Possible cause Remedy

There is no spark when

you try to activate the

spark generator.

The appliance is not con‐

nected to an electrical sup‐

ply or it is connected incor‐

rectly.

Check if the appliance is

correctly connected to the

electrical supply.

Refer to the connection di‐

agram.

There is no spark when

you try to activate the

spark generator.

Burner cap and crown are

placed incorrectly.

Place the burner cap and

crown correctly.

www.electrolux.com26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare