Electrolux EHD60020P Bedienungsanleitung PDF herunterladen (Seite 41)

For your safety, do not clean the appli-

ance with steam blasters or high-pres-

sure cleaners.

Scratches or dark stains on the glass

ceramic have no effect on how the ap-

pliance operates.

To remove the dirt:

1. – Remove immediately: melted plas-

tic, plastic foil, and food with sugar. If

not, the dirt can cause damage to the

appliance. Use a special scraper for

the glass . Put the scraper on the

glass surface at an acute angle and

move the blade on the surface .

–

Remove after the appliance is suf-

ficiently cool: limescale rings , water

rings, fat stains, shiny metallic discol-

orations. Use a special cleaning agent

for glass ceramic or stainless steel.

2. Clean the appliance with a moist cloth

and some detergent.

3. At the end rub the appliance dry with

a clean cloth.

WHAT TO DO IF...

Problem Possible cause and remedy

You cannot start the appliance

or operate it.

•

The key lock or child safety device operates

. Stop the func-

tion. See the section "Locking/unlocking the control panel"

and “Child safety device”.

•

STOP+GO operates

. Stop the function. See the section

"Stop and go".

• You touched 2 or more sensor fields at the same time. Only

touch one sensor field.

• There is water or fat stains on the control panel. Clean the con-

trol panel

• Start the appliance again and set the heat setting within 10 sec-

onds.

A sound operates when the ap-

pliance is off.

You covered one or more sensor fields. Uncover the sensor fields.

A sound operates 6 times, the

appliance stops.

You covered one or more sensor fields. Uncover the sensor fields.

The residual heat indicator does

not come on.

The cooking zone is not hot because it operated only for a short

time. If the cooking zone must be hot, speak to the after sales

service.

The automatic warm up function

does not start.

•

There is still residual heat on the cooking zone

. Let the

cooking zone cool down

• The highest heat setting is set. The highest heat setting has

the same power as the automatic warm up function.

A sound operates and appliance

starts and stops again. After 5

seconds one more sound oper-

ates.

You covered . Uncover the sensor field.

Sensor fields become hot. The cookware is too big or you put it too near the controls. Put

large cookware on the rear cooking zones if necessary.

The display changes between

two heat settings.

Power Management decreases the power of this cooking zone.

Use cooking zones on the other side.

comes on.

• The automatic switch-off operates. Stop the appliance and

start it again.

Overheating protection for the cooking zone operates. Stop the

cooking zone and start it again.

electrolux 41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux EHD60020P Bedienungsanleitung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Electrolux EHD60020P