
DAILY USE
ACTIVATION AND
DEACTIVATION
Touch for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
•
All cooking zones are deactivated (
).
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sound some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
, - — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
THE HEAT SETTING
Touch to increase the heat setting.
Touch
to decrease the heat setting. The
display shows the heat setting. Touch
and at the same time to deactivate the
cooking zone.
ACTIVATION AND
DEACTIVATION OF THE OUTER
RING
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
field
. The indicator comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
AUTOMATIC HEAT UP
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function
the cooking zone must be cold (no
in
the display). Touch
of the cooking zone
again and again until the necessary heat
setting comes on. After 3 seconds
comes on in the display.
To stop the function, touch
.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
TIMER
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
•
To set the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
•
To activate or change the Timer:
touch
or of the timer to set the
time (
00
-
99
minutes). When the indi-
cator of the cooking zone starts to flash
slow, the time counts down.
• To deactivate the Timer: set the cook-
ing zone with
and touch to deacti-
vate the Timer. The remaining time
counts back to
00
. The indicator of the
cooking zone goes out.
ENGLISH 7
Kommentare zu diesen Handbüchern