
Problem Possible cause Remedy
You cannot activate or op-
erate the hob.
The oven does not heat up.
The fuse is released. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact a
qualified electrician.
The oven / hob display
shows an error code that is
not in this table.
There is an electrical fault. Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again.
If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
You cannot activate or op-
erate the hob.
The fuse is released. Activate the hob again and
set the heat setting in less
than 10 seconds.
Residual heat indicator
does not come on.
The zone is not hot be-
cause it operated only for a
short time.
If the zone operated suffi-
ciently long to be hot,
speak to an Authorised
Service Centre.
You cannot activate the
outer ring.
Activate the inner ring first.
The oven does not heat up. The oven is deactivated. Activate the oven.
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the cook-
ing process ends.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are
not set.
Make sure that the settings
are correct.
It takes too long to cook the
dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the ad-
vice in the user manual.
The display shows an error
code that is not in this ta-
ble.
There is an electrical fault. Deactivate the oven with
the house fuse or the safety
switch in the fuse box and
activate it again.
If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
The display shows "12.00". There was a power cut. Reset the clock.
ENGLISH
21
Kommentare zu diesen Handbüchern