Electrolux EKC6051BOX Bedienungsanleitung PDF herunterladen (Seite 31)

180°

When you install the appliance,

set the appliance top surface hori-

zontally.

Use a screwdriver to adjust the wheels

(1). Use a key to adjust the small feet on

the bottom of the appliance (2).

1

2

12.3 Anti-tilt protection

CAUTION!

You must install the anti-tilt pro-

tection. If you do not install it, the

appliance can tilt.

Your appliance has the symbol

shown on the picture (if applica-

ble) to remind you about the in-

stallation of the anti-tilt protection.

Make sure you install the anti-tilt

protection at the correct height.

1.

Set the correct height and area for

the appliance before you attach the

anti-tilt protection.

2.

Install the anti-tilt protection 77 mm

down from the top surface of the ap-

pliance and 49 mm from the left side

of the appliance into the circular hole

on the bracket (see fig.). Screw it into

the solid material or use applicable re-

inforcement (wall).

3.

You can find the hole on the left side

at the back of the appliance (see fig.).

Lift the front of the appliance (1) and

put it in the middle of the space be-

tween the cupboards (2). If the space

between the bench cupboards is

larger than the width of the appliance,

you must adjust the side measure-

ment to centre the appliance.

Make sure that the surface behind the

appliance is smooth.

ENGLISH 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare