
Problem Possible cause Remedy
The flame extinguishes im-
mediately after ignition.
Thermocouple is not heated
up sufficiently.
After lightning the flame,
keep the knob pushed for
equal or less than 10 sec-
onds.
The flame ring is uneven. Burner crown is blocked
with food residues.
Make sure that the injector
is not blocked and the
burner crown is clean.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about
the Service Centre and conditions of
guarantee are in the guarantee booklet.
8. INSTALLATION
WARNING!
Refer to Safety chapters.
8.1 Before the installation
Before you install the hob,
write down the serial number
(Ser. Nr) from the rating plate.
The rating plate is on the
bottom of the hob.
ELECTROLUX
EQG4120BOG
PNC 941 460 008
01
Typ 55 FED 04 GA 220 - 240 V
50 - 60 Hz
Gas type: G20 2H
2E+ - 20 mbar
PIN 0063CL3461
Butan: 350 g/h Qn (Hs): 4.9 kW
Ser.Nr. .................
ELECTROLUX
EQW4111BOG
PNC 941 460 017
00
Typ 55 FED 04 GA 220 - 240 V
50 - 60 Hz
Gas type: G20 2H
2E+ - 20 mbar
PIN 0063CL3461
Butan: 350 g/h Qn (Hs): 4.9 kW
Ser.Nr. .................
8.2 Gas Connection
WARNING!
The following instructions
about installation, connection
and maintenance must be
carried out by qualified
personnel in compliance with
standards and local
regulations in force.
Make sure that during the installation the
appliance is not connected to electrical
supply. Disconnect the mains plug or
deactivate the fuses. Disconnect the
mains gas supply.
Make sure that there is a stop tap
assembles between the gas supply of
house and the appliance.
The settings for this appliance are located
on the rating plate. The present settings
for the type of gas and gas pressure are
on a sticker.
Choose fixed connections or use a flexible
pipe in stainless steel in compliance with
ENGLISH
11
Kommentare zu diesen Handbüchern