Electrolux EQWP4510IK Bedienungsanleitung PDF herunterladen (Seite 13)

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and non-abrasive

detergent. After cleaning, wipe the hob

dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a moist cloth.

6.3 Cleaning the wok

• Clean the wok inside and out with

washing up liquid after every use.

• Soften heavy deposits with hot water.

Clean the wok with a chromium steel

cleaner and a sponge.

• Blue discolourations, limescale stains

or protein stains are best removed with

vinegar or lime juice.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op-

erate the hob.

The hob is not connected

to an electrical supply or it

is connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the con-

nection diagram.

The fuse is blown. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse is blown

again and again, contact a

qualified electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor field.

STOP+GO function oper-

ates.

Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva-

ted.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare