
time comes on and the hob
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting The hob deacti-
vates after
, 1 - 3
6 hours
4 - 7 5 hours
8 - 9 4 hours
10 - 14 1.5 hour
4.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.
4.4 Use of the wok
Put the wok pan into the wok niche
carefully. Do not shake the wok pan while
it is in the wok niche.
CAUTION!
Make sure the handle does
not hit or scratch the surface.
It can cause damage to the
hob.
4.5 Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone: touch . comes on.
To deactivate the function: change the
heat setting.
4.6 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
The selection of the Timer function is
possible when the cooking zone is active
and the heat setting is set.
To activate the function: touch of
the timer to set the time (00 - 99 minutes).
When this function is active, comes on.
To see the remaining time: touch
again and again until comes on. The
display shows the remaining time.
To change the time: touch again and
again until comes on. Touch or .
To deactivate the function: touch
again and again until comes on. Touch
. The remaining time counts back to 00.
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
To stop the sound: touch .
CountUp Timer (The count up
timer)
You can use this function to monitor how
long the cooking zone operates.
To activate the function: touch
. The
symbol goes out and comes on.
To see how long the cooking zone
operates: touch
again and again until
comes on. The display shows how
long the zone operates. During the first
minute the display shows the time in
seconds. After the first minute the display
shows the time in minutes.
ENGLISH
9
Kommentare zu diesen Handbüchern