
9
SurfaceCooking
PLACEMENT OF BURNER HEADS AND CAPS
LOCATIONS OF THE BURNERS
The30”cooktopisequippedwithdifferentsizedburners.
The surface burners are located on the cooktop as follows (See Figure):
- a 5000BTU(natural gas) burner located at the right rear position;
- a 18000BTU(natural gas) burner located at the left rear position;
- a 9500BTU(natural gas) burner located at the left front position;
- and a 14000BTU(natural gas) burner located at the right front position.
The36”cooktopisequippedwithdifferentsizedburners.
30”cooktop
The surface burners are located on the cooktop as follows (See
Figure):
- a 5000BTU(natural gas) burner located at the right rear position;
- two 9500BTU(natural gas) burners located at the left front and
left rear positions;
- a 18000BTU(natural gas) burner located at the center position;
- and a 14000BTU(natural gas) burner located at the right front
position.
36”cooktop
Forthe18000BTUburner:
Placetheburnerheadoverthegasorice(Figure1).Becarefulnottodamagethe
electrodewhileplacingtheburnerheadovertheorice.Makesureelectrodets
correctly into slot in burner head.
Forallburners:
Place a burner cap on each burner head
(seeFigure2),matchingthecapsizeto
theheadsize.Thecapforeachburnerhas
an inner locating ring which centers the
cap correctly on the burner head. Be sure
that all the burner caps and burner heads
are correctly placed BEFORE using your
appliance.
Make sure each burner cap is properly
aligned and level.
Turn the burner on to determine if it will
light. If the burner does not light, contact a
Service Center. Do not service the sealed
burner yourself.
Figure 1 Figure 2
Burner
Cap
Burner
Head
Burner
Cap
Burner
Head
Gas
Opening
Electrode
Kommentare zu diesen Handbüchern