
BEFORE FIRST USE
Warning! Refer to "Safety information"
chapter.
Remove all packaging, both inside and
outside the oven, before using the ap-
pliance. Do not remove the rating plate.
Caution! To open the oven door,
always hold the handle in the centre.
Setting the time
The oven only operates after time set.
When you connect the appliance to the
electrical supply or in case of a power cut,
the Time function indicator flashes automat-
ically.
To set the current time use " + " or " - "
button.
After approximately 5 seconds, the flashing
stops and the display shows the time of
day set.
For time change you must not set an
automatic function (Duration
or End
) at the same time.
Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Important! Refer to chapter "Care and
Cleaning".
Preheating
Set
and maximum temperature and run
an empty oven for 45 minutes, to burn off
any residue from the cavity surface. Acces-
sories can become hotter than in normal
use. During this period an odour can be
emitted. This is normal. Make sure the
room is well ventilated.
HOB - DAILY USE
Warning! Refer to "Safety information"
chapter.
Ignition of the burner
Warning! Be very careful when you
use open fire in kitchen environment.
Manufacturer decline any responsibility
in case misuse of the flame
Always light the burner before you put
cookware.
To light the burner:
1. Push and hold the spark generator but-
ton
.
2. Turn the control knob counterclockwise
to the maximum position
.
3. Release the spark generator button but
keep the control knob on this position
for approximately 5 seconds; this will let
thermocouple to warm up. If not, the
gas supply will be interrupted.
4. Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are
in correct positions.
3
4
2
1
1 Burner cap
2 Burner crown
3 Ignition candle
26 electrolux
Kommentare zu diesen Handbüchern