Electrolux 4GFGX Bedienungsanleitung PDF herunterladen (Seite 14)

Fig. 17

Injectors replacement

1) Remove the pan supports.

2) Remove the burner's caps and crowns.

3) With a socket spanner 7 unscrew and remove the

injectors (Fig. 18), and replace them with the ones

required for the type of gas in use (see table 2).

4) To adapt the appliance to town gas, after installing the

proper injectors, fit the grid filter A (Fig. 19) on the

semi-rapid and auxiliray burner injectors.

5) Reassemble the parts, following the same procedure

backwards.

6) Replace the rating label (placed near the gas supply

pipe) with the relevant one for the new type of gas

supply. You can find this label in the package of the

injectors supplied with the appliance.

Should the feeding gas pressure be different or variable

compared with the required pressure, an appropriate

pressure adjuster must be fitted on the gas supply pipe,

in compliance with the rules in force.

Fig. 18

FO 0795

FO 0392

Fig. 19

FO 0465

To adapt the appliance to a different kind of gas from the

one the appliance has been set for, follow the instructions

below in their order.

Replacement of rubber pipe

holder (Fig. 17) LPG preset range

To set the appliance ready for use with LPG, fit the rubber

pipe holder A.

To set the range ready for natural gas, fit the rubber pipe

holder «B» (supplied with the appliance). Always insert

the gasket «C» between the feeding pipe and the rubber

pipe holder.

Adaptation to different types of gas

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Electrolux 4GFGX Bedienungsanleitung Seite 14