Electrolux EOB64100W Bedienungsanleitung PDF herunterladen (Seite 21)

Replacing the oven light bulb/cleaning the

glass cover

1. Turn the glass cover anti-clockwise to

remove it.

2. Clean the glass cover.

3. Replace the oven light bulb with appli-

cable 300°C heat-resistant oven light

bulb.

4. Install the glass cover.

Replacing the oven lamp:

1. You can find the lamp glass cover at

the left side of the cavity. Remove the

left shelf support rail.

2. Use a narrow, blunt object (e.g. a tea-

spoon) to take off the glass cover and

clean it.

3. If necessary: Replace the oven lamp

with applicable 300°C heat-resistant

oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

5. Install the left shelf support rail.

Oven door and glass panels

To clean the oven door remove it.

Caution! Be careful when you remove

the door from the appliance. The door

is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two

door hinges fully.

A

A

3. Close the oven door until the first posi-

tion (angle approx. 45°).

45°

4. Hold of the oven door with one hand

on each side and pull it away from the

oven at an upwards angle.

Put the oven door with the outer side

down on a soft and level surface to

prevent scratches.

5. Now you can remove the inner glass

panels and clean them.

To install the door follow the procedure

in reverse.

Caution! Be careful with the glass, it

can break.

The oven door has 2, 3 or 4 panels of

glass (depends on the model)

Caution! Rough handling, especially

around the edges of the front panel,

can cause the glass to break.

electrolux 21

1 2 ... 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare