Electrolux EQ98X Bedienungsanleitung PDF herunterladen (Seite 12)

12 installing your cooktop electrolux keyhole cooktop

7. Install seven positioning clips into special holes on the

sides of the appliance, see gures left and below.

8. Place appliance into cut-out and check the t. The

appliance should be a good t and not move in any

direction.

9. Fit the gas connection elbow to the end of the manifold

pipe. Ensure the sealing washer is inserted into the elbow

rst. Orient the elbow to the desired position and use two

spanners to tighten the connection, see diagram below.

10. Connect the gas supply tubing and ensure all the

connections are sound and gas tight.

11. Turn on the gas and check for gas leaks on all the

connections that have been made.

12. Plug in the appliance electrical supply cord into the

power socket.

NOTE: there will be a beep from the induction unit when the

power is switched on.

13. Operate burner to check ame quality & turndown

operation.

NOTE: When rst operating the burner it may take several

attempts to light the burner before all the air has been

expelled from the supply system.

A normal ame consists of inner and outer ame which

should be a blue colour. If the ame has yellow tips or is

noisy then it may be necessary to adjust the aeration. The

aeration adjustment control is located on the bottom of the

product see gure below.

Installation

aeration adjustment

1 2 3

manifold pipe

manifold nut

washer

elbow

metal tube

connection

elbow

rubber hose

connection

elbow

1 2 ... 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Electrolux EQ98X Bedienungsanleitung Seite 12