Electrolux ER6422T Bedienungsanleitung PDF herunterladen (Seite 6)

Building the appliance in under a

worktop

This appliance can also be built in under the

worktop of your kitchen units. To do this, proceed

as follows:

remove screws which secure the top to the rear

brackets and front hinges;

move the top slightly to release it from the

retainers and remove it;

unscrew the screws securing the rear feet to the

cabinet;

remove the 3 mm shim from the feet and reﬁt

them;

screw in the front feet to obtain the required

height.

Note

Hole provided in the top hinges enable the

appliance to be secured to the kitchen worktop by

means of two screws.

Important

For the appliance to function properly, an opening

of at least 137 cm

(Fig. 3) must be cut in the

kitchen worktop.

A minimum clearance must also be provided

between the condenser and the wall, as shown in

the Fig. 4.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably

sized auto-transformer must be used.

Fig. 3

Fig. 4

D219

min 137cm

PR122

60 mm

min.

50 cm

TECHNICAL SPECIFICATION

The technical data is indicated in the rating plate on the left side inside the appliance.

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux ER6422T Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Electrolux ER6422T