Electrolux WS200SL Bedienungsanleitung Seite 53

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 68
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 52
ENGLISH 53
USE
Before using for the first time
Before using the appliance for the first
time you should clean the interior and the
exterior, following the cleaning
instructions given in the section
“Cleaning and Maintenance”.
Then heat the crockery warmer for at
least 2 hours. For this, turn the
temperature control to the maximum
position (see section ‘Selecting
temperature”).
Make sure the kitchen is well-ventilated
when you are doing this.
The appliance’s parts are protected by a
special product. For this reason, during
the first heating an odour will be
released. Both the odour and any smoke
that may form will disappear after a short
time and neither signifies that there is
anything wrong with the connection or
the appliance.
Control Panel
1 2
3
4 5 6
1. Timer indicator light
2. Temperature indicator light
3. Delayed Start indicator light
4. Function / ON/OFF key
5. -
6.
Operating settings
Stand-by mode
In this mode the whole system is
disconnected and no indicator light or
display is lit.
Normal Operation
In this mode the system is generating
heat. The display shows the remaining
operating time and the set temperature
alternating each 2 seconds. The Timer
and Temperature indicator lights light-
up alternating each 2 seconds and
coordinated with the display indication.
The Operation indicator light is
illuminated continuously until the Timer
reaches zero.
To program the normal operation,
proceed as follows:
1. Press the key once or several
times until the Timer indicator light
is flashing.
2. Press the “+” or -keys to set the
desired operation time in the range
0h00 4h00.
3. Press the key to validate. The
Temperature indicator light starts to
flash.
4. Press the “+” or -keys to set the
desired temperature in the range
30 80ºC.
5. Press the “ ” key for 3 seconds or
wait 5 seconds.
6. The Warming Drawer starts to
operate with the set parameters.
Seitenansicht 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare