Electrolux EOB8857AAX Bedienungsanleitung PDF herunterladen (Seite 22)

The core temperature

sensor must stay in the meat

and in the socket during the

cooking.

1. Turn on the appliance.

2. Put the tip of the core temperature

sensor into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket at the front of

the appliance.

The display shows the core temperature

sensor symbol.

4. Press or in less than 5

seconds to set the core temperature.

5. Set the heating function and, if

necessary, the oven temperature.

The appliance calculates an approximate

end time. The end time is different for the

different quantities of the food, the set

oven temperatures (minimum 120 °C)

and the operating modes. The appliance

calculates the end time in approximately

30 minutes.

6. To change the core temperature,

press .

When the meat is at the set core

temperature, an acoustic signal sounds.

The appliance turns off automatically.

7. Press any symbol to stop the signal.

8. Remove the core temperature sensor

plug from the socket and remove the

meat from the oven.

9. Press to turn off the appliance.

WARNING!

The core temperature

sensor is hot. There is a risk

of burns. Be careful when

you remove the tip and the

plug of the core temperature

sensor.

9.2 Inserting the accessories

Wire shelf:

Push the shelf between the guide bars of

the shelf support and make sure that the

feet point down.

Deep pan:

Push the deep pan between the guide

bars of the shelf support.

Wire shelf and the deep pan together:

Push the deep pan between the guide

bars of the shelf support and the wire

shelf on the guide bars above and make

sure that the feet point down.

www.electrolux.com22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare