Electrolux EKG6013X Bedienungsanleitung PDF herunterladen (Seite 27)

electrolux 27

Oven lamp replacement

Disconnect the appliance from

the electricity supply.

If the oven bulb needs replacing, it

must comply with the following specifi-

cations: electric power, 15 W/25 W;

electric rate, 230 V (50 Hz); resistant to

temperatures of 300°C; connection

type: E14. These bulbs are available

from your local Service Force Centre.

To replace the faulty bulb (Fig. 15):

1. Ensure the oven is disconnected from

the electrical supply.

2. Turn the glass cover anticlockwise.

3. Remove the faulty bulb and replace

it with the new one.

4. Refit the glass cover.

5. Reconnect to the electrical supply.

)

Fig. 15

Lid cleaning

The crystal lid can be dissasembled

to allow a better cleaning ( see Fig. 16).

Clean the crystal lid only with warm

water and avoid the use of rough cloths

or abrasive substances.

After a proper cleaning, carefully

reposition the lid into its hinges.

Balancing the lid

Appliances provided with crystal lids

are equipped with specially balanced

springs, inserted in the hinges at the

back of the appliance, to allow the lid to

be closed smoothly and easily.

You can use a screwdriver to adjust

the closure of the lid. The necessary

force for opening/closing the lid can be

increased by turning the adjusting screw

2 or 3 times as shown in figure 17.

Fig. 16

Fig. 17

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 79 80

Keine Kommentare

Electrolux EKG6013X Bedienungsanleitung Seite 27