
9.3 Telescopic runners
1 cm
You can install telescopic runners on dif-
ferent shelf levels, except level 4.
Installing the telescopic runners
1.
Turn the telescopic runner by approx-
imately 90°.
2.
Slide the catch on the rear end of the
telescopic runner onto a shelf support
rail. You can install the telescopic run-
ners on each shelf level, except level
4. Make sure that you put the runner
on the correct side of the oven.
3.
Turn the runner to the correct posi-
tion. The stop element that is at one
end of the telescopic runner must
point up.
4.
Push the runner all the way to the rear
wall of the oven.
5.
Push the front end of the telescopic
runner against the shelf support rail.
There is a click when the catch on the
front end engages correctly.
6.
Do the same steps to install the sec-
ond telescopic runner. Make sure that
the two telescopic runners are on the
same level.
1
2
Removing the telescopic runners
1.
Press and hold the catch on the front
end of the telescopic runner.
2.
Pull the front end of the runner away
from the shelf support.
3.
Turn the telescopic runner by approx-
imately 90°.
4.
Remove the rear end of the runner
from the shelf support.
5.
Do the same steps to remove the
second telescopic runner.
CAUTION!
Do not clean the telescopic run-
ners in the dishwasher. Do not lu-
bricate the telescopic runners.
9.4 Telescopic runners -
inserting the oven accessories
Put the baking tray or roasting pan on the
telescopic runners.
The high rim around the oven
shelf is a special device to prevent
the cookware from slipping.
14
www.electrolux.com
Kommentare zu diesen Handbüchern