Electrolux EHI6540FW1 Bedienungsanleitung PDF herunterladen (Seite 9)

Heat setting The hob deacti‐

vates after

10 - 14 1.5 hour

4.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct

heat setting.

4.4 Cooking zone indication

The horizontal line shows the maximum

size of the cookware.

max.

Refer to “Technical information” chapter.

4.5 Bridge function

This function connects two left side

cooking zones and they operate as one.

First set the heat setting for one of the

left side cooking zones.

To activate the function: touch . To

set or change the heat setting touch one

of the control sensors.

To deactivate the function: touch .

The cooking zones operate

independently.

4.6 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch the correct heat

setting. After 3 seconds comes on.

To deactivate the function: change the

heat setting.

4.7 Power function

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

4.8 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare