Electrolux EKC603505W Bedienungsanleitung PDF herunterladen (Seite 25)

electrolux 25

Electrical connection

Prior to making the electric al connection,

make sure that:

- The protection fuse and the domestic wire

system are suitable to carry the total

electric load of the oven (see rating plate).

- Your domestic wiring system has an

efficient earth connection in compliance

with the rules and laws in force.

- The wall socket or the omnipole switch

used for the electrical connection can

easily be reached after the oven is built

in.

The appliance is delivered without an

electric supply cable, therefore you will have

to fit to it a supply cable with standard plug,

suitable for the total electric load shown on

the rating plate.

The plug is to be inserted into a suitable

wall socket.

If you require a direct connection to the

electric network (mains), it will be necessary

to fit between the appliance and the mains

an omnipole switch, aith a minimum gap

between contacts of 3 mm. suitable for the

required load and in compliance with rules in

force.

The green & yellow ground wire must not

be interrupted by the switch and it should be

2-3 cm. longer than the other cables.

The supply cable must in all cases be laid

out in such a way as to ensure that it does

not reach at any given point a temperature

50°C higher than the ambient temperature.

The manufacturer disclaims any

liability in case these accident-

preventing rules are not observed.

Suitable power supply cables are the

following types, considering the respective

necessary section of cable.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare