
OPTIHEAT CONTROL (3 STEP
RESIDUAL HEAT INDICATOR)
Warning! \ \ The risk of
burns from residual heat!
OptiHeat Control shows the level of the re-
sidual heat. The induction cooking zones
make the heat necessary for cooking di-
rectly in the bottom of the cookware. The
glass ceramic is hot from the heat of the
cookware.
OPERATING INSTRUCTIONS
ACTIVATION AND DEACTIVATION
Touch
for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function stops the hob
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). The sound
operates some time and the appliance
deactivates. Remove the object or clean
the control panel.
• The appliance become too hot (e.g.
when, a saucepan boils dry). Before you
use the hob again, the cooking zone
must be cool.
• You use not correct cookware. The sym-
bol
comes on and the cooking zone
deactivates automatically after 2 minutes.
• You do not deactivate a cooking zone or
change the heat setting. After some time,
comes on and the appliance deacti-
vates. See the table.
The times of Automatic Switch Off
Heat setting
- - - -
The cooking
zone deacti-
vates after
6 hours 5 hours 4 hours 1.5 hours
THE HEAT SETTING
Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
sary. Do not release before you have a cor-
rect heat setting. The display shows the
heat setting.
P
AUTOMATIC HEAT UP
1
2
3
4
5
6
7
8
9
10
11
12
0
1234567891011121314
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
8 electrolux
Kommentare zu diesen Handbüchern