
43
INSTRUCTIONS FOR THE INSTALLER
The following instructions are meant for a qualified
installer, in order that the operations of installation,
regulation, and service are executed according to the
existing regulations.
Whenever changes are mode involving the
disconnection of the machine it is necessary to
proceed with maximum caution.
THE MANUFACTURING COMPANY DECLINES ANY
RESPONSABILITY FOR POSSIBLE DAMAGES
RESULTING FROM AN INSTALLATION WHICH
DOESN'T COMPLY WITH THE RULES IN FORCE
INSTALLATION ENVIRONMENT
Warning - This unit can be installed and can work only
in constantly ventilated rooms, according to rules in
force.
In order to make the gas unit work properly, it is
necessary that air sufficient to gas combustion can
naturally flow in the room. (The installer must follow the
rules in force).
The air flow into the room must come directly through
openings of external walls - See fig. 22-23.
These openings must have a free passage of at least
200 cm
2
(one or more openings can be made).
These openings (or opening) should be realized in
such a way not to be occluded both from inside and
outside and preferably positioned near the floor,
opposite the combustion products discharge. In case
these systems can't be realized in the room where the
unit is installed, the necessary air can come from a
room nearby, provided that this room is not a bedroom
or a dangerous environment and it is ventilated as
requested.
Lid cleaning
All the cooker lids can be disassembled, to allow a
better cleaning.
Enamelled lids can be dissasembled as shown in fig. 21.
As regards crystal lids, follow instructions included in
the chapter named "Balancing the lid".
After a proper cleaning, carefully reposition the lid into
its hinges.
FO 0418
Fig. 21
ENTRATA ARIA
SEZIONE MIN.
200 cm
2
ENTRATA ARIA
SEZIONE MIN.
200 cm
2
FO 0159
Fig. 22
Fig. 23
AIR INLET
SECTION
MIN. 200 cm
2
FO 0160
AIR INLET
SECTION
MIN. 200 cm
2
Kommentare zu diesen Handbüchern