Electrolux TKGLES7000 Bedienungsanleitung PDF herunterladen (Seite 19)

Changing programme

To change a programme which has been selected by mistake once the programme

has started, first turn the programme selector to OFF Aus and then reset the pro-

gramme.

The programme can no longer be changed directly once the programme

has started. If nevertheless there is an attempt to change the programme

on the programme knob, the programme progress display and the main-

tenance indicators flash. If an option button (excluding the BUZZER Sig-

nal button) is pressed, Err appears in the multidisplay. The drying

programme is not however affected by this (laundry protection).

Putting in extra items or taking items out before end of programme

1. Open loading door.

Laundry and drum can become hot. Risk of burns!

2. Load or remove laundry items.

3. Close loading securely. Lock must audibly lock.

4. Press the Start/Pause button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0". If the BUZZER

Signal button has been pressed, an acoustic signal sounds intermittently for about

one minute.

The drying cycles are automatically followed by an anti-crease phase which

lasts around 30 minutes. The drum rotates at intervals during this phase.

This keeps the laundry loose and free of creases. The laundry can be re-

moved at any time during the anti-crease phase. (The laundry should be

taken out towards the end of the anti-crease phase at the latest to prevent

creases from forming.) If LONG ANTI-CREASE Knitterschutz Plus function

has been selected, the anti-crease phase is lengthened by 60 minutes.

daily use electrolux 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Keine Kommentare

Electrolux TKGLES7000 Bedienungsanleitung Seite 19