
Machine settings
Setting Implementation
BUZZER Signal perma-
nent off
1. Turn the programme selector to any pro-
gramme.
2. Press simultaneously the DELICATE Schon and
LONG ANTI-CREASE Knitterschutz Plus but-
tons and hold down for approx. 5 seconds.
3. The buzzer is by default always off. You can use
BUZZER Signal button to activate or deactivate
sound but machine does not memorize your
selection.
Water hardness
Water contains, a varia-
ble quantity of limestone
and mineral salts of
which quantities vary ac-
cording to geographical
locations thus varying its
conductivity values.
Relevant variations of the
conductivity of the water
compared to those pre-
fixed by the factory could
slightly influence the
residual humidity of the
laundry at the end of the
cycle. Your dryer allows
you to regulate the
sensitivity of the drying
sensor based on
conductivity values of the
water.
1. Turn the programme selector to any pro-
gramme.
2. Press simultaneously the DELICATE Schon and
TIME Zeitwahl buttons and hold down for ap-
prox. 5 seconds. The current setting is on the
display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro
S/cm
–
high conductivity >600 micro S/cm
3. Press the Start/Pause button sequentially until
you set desired level.
4. To memorize setting press simultaneously the
DELICATE Schon and TIME Zeitwahl buttons or
turn knob to OFF Aus position
machine settings electrolux 31
Kommentare zu diesen Handbüchern