Electrolux C41022G-M Bedienungsanleitung PDF herunterladen (Seite 16)

10 electrolux Cleaning and Maintenance

Cleaning the barbecue

For optimum cleaning in accordance with manufacturing

characteristics, use products that are not excessively

aggressive.

To clean the metal internal parts, we recommend wearing

work gloves.

Stainless steel

After each use, and when the appliance has cooled down, we

recommend cleaning the external and internal parts and the

stainless steel accessories to help the barbecue last longer.

To clean and preserve the external stainless steel surfaces,

always use specific products without abrasives or chlorine-

based acids. Do not use metal sponges or sharp scrapers.

Use wooden or plastic utensils if necessary.

Using detergent: spray the detergent repeatedly on the

steel surfaces of the barbecue. Clean with a non-abrasive

sponge, rinse carefully and dry with a soft cloth. For best

results, leave the detergent to work for a time. To remove any

yellow areas on the steel, pour some stainless cream cleaner

onto kitchen paper and rub in the direction of the satin finish.

Internal components

Enamelled cast iron grills and griddle

The cast iron grills

and griddles

should be cleaned when

still slightly warm. To clean the griddles

use the supplied

scraper C.

To remove any food residue, rub with a brass bristle brush.

Then wash the grills and griddle with a degreasing agent and

rinse with plenty of tepid water.

Continual contact with the flame may over time fade the shine

on the steel near the areas exposed to heat. This is entirely

natural and does not alter the performance of the appliance in

any way. To limit the yellowing, use stainless cream cleaner

on a non-abrasive sponge.

The cast iron grills and the griddles are also dishwasher safe.

After thorough cleaning and before using the cast iron grills

and griddles again, remove any detergent residue by lighting

the burners on maximum for a few minutes.

Maintenance of the teak wood

To clean and preserve always use specific products normally

available on the market and which may ensure the lasting all

over the years.

In case those products are not available we recommend to

remove the grease as soon as possible by using a soft cloth

dampened with water.

Burners

Periodically check that the burners light properly and that no

gas outlet holes are clogged. If a burner does not light fully, it

may be sufficient to use compressed air to clear the holes

clogged with dust or the like. If this is not effective,

disassemble the burners and clean them thoroughly (e.g.

putting a pin through the clogged holes and blowing

compressed air straight into the burner).

Disassembling the burners

• Remove the grills

and the griddles

• Remove the flame spreaders

• Estract the tiles frame G.

• To remove the burners

remove the cotter pins

(one per

burner); then free the Venturi tube from its seat and take

out.

• Remove the deflectors

• Clean the barbecue vessel with stainless steel detergent.

Rinse and dry.

• Carefully clean the individual components and refit them

with the above procedure in reverse order.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux C41022G-M Bedienungsanleitung Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Electrolux C41022G-M