
Problem Possible cause Remedy
The display shows
“Demo”. The appli-
ance does not heat
up. The fan does
not operate.
The test mode is activated.
1.
Deactivate the appli-
ance.
2.
Touch and hold until
the appliance activates
and deactivates.
3.
Touch and hold and
at the same time un-
til an acoustic signal
sounds and “d” goes
out.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
14. TECHNICAL DATA
Voltage 230 V
Frequency 50 Hz
15. INSTALLATION
WARNING!
Refer to the Safety chapters.
15.1 Building In
573
594
5
589
558
548
20
ENGLISH 41
Kommentare zu diesen Handbüchern