Electrolux ERC37302W Bedienungsanleitung PDF herunterladen (Seite 8)

Hints for temperature inside the fridge

• A suitable temperature inside the fridge is

approx. +5° C. If the temperature regulator

is set to a too cold temperature, food with

a high water content may start to freeze if

it has been placed in the coldest places in

the fridge. The picture shows the coldest

and warmest places inside the fridge.

• If you want to check the temperature of

food stored in the refrigerator, place a

glass of water centrally in the cabinet, and

put a proper thermometer with an accura-

cy of +/– 1 °C into it. After 6 hours the

temperature can be monitored. The meas-

uring shall be performed under steady-sta-

ted conditions (without changing the load).

Care and cleaning

Caution! Unplug the appliance before

carrying out any maintenance operation.

This appliance contains hydrocarbons in

its cooling unit; maintenance and re-

charging must therefore only be carried

out by authorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with luke-

warm water and some neutral soap.

• regularly check the door seals and wipe

clean to ensure they are clean and free

from debris.

• rinse and dry thoroughly.

Important! Do not pull, move or damage any

pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders,

highly perfumed cleaning products or wax

polishes to clean the interior as this will dam-

age the surface and leave a strong odour.

Clean the condenser (black grill) and the

compressor at the back of the appliance with

a brush or a vacuum cleaner. This operation

will improve the performance of the appli-

ance and save energy consumption.

Important! Take care of not to damage the

cooling system.

Important! When moving the cabinet, lift it

by the front edge to avoid scratching the

floor.

Many proprietary kitchen surface cleaners

contain chemicals that can attack/damage

the plastics used in this appliance. For this

reason use a soft cloth rinsed in warm water

and neutral soap emulsion for cleaning ex-

ternal surfaces.

Important! Do not use detergents or

abrasive paste as these will damage the

paint, or stainless steel anti finger print

coating.

After cleaning, reconnect the equipment to

the mains supply.

Cleaning the ventilation grille

The ventilation grille can be removed for

washing.

8 electrolux

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare