
Some models are fitted with a silencing
pad under the cabinet. Do not remove
this pad.
8.5 Rear spacers
Install the two spacers and the locking
pins provided within the accessory bag
as shown in the figure.
8.6 Levelling
When placing the appliance ensure that
it stands level. If necessary adjust the
feet using the adjustment spanner
supplied. Door alignment is dependent
on proper levelling.
8.7 Door reversibility
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
1. Remove the ventilation grille.
Remove the upper filling and install it
on the opposite side of the grille.
2. Remove the pedal hole cover and
install the cover provided in the
accessory bag on the opposite side.
3. Lay down the appliance back side
down on a wooden support.
4. Unscrew the hinge (1) and remove
the cover plate (2) and the support
(3).
5. Remove the cover (4) on the
opposite side and install the support
(3) the cover plate (2) and the hinge
(1). Install the cover (4) on the
opposite side.
6. Unscrew the lower hinge (1). Move
the pin to the opposite side (2).
7. Unscrew and move the pedal to the
opposite side (3).
8. Unscrew (1) and move (2) the
bracket to the other side on the door.
ENGLISH 15
Kommentare zu diesen Handbüchern