Electrolux EUF23800 Bedienungsanleitung

user manualFreezerEUF23800

12345Important! The wires in the mains lead arecoloured in accordance with the followingcode:1Green and Yellow: Earth3Brown: Live5Blue: NeutralAs the

Ventilation requirementsThe airflow behind the appliance must besufficient.min.200 cm2min.200 cm2Installing the applianceCaution! Make sure that the m

4. Adjust the appliance in the niche.Make sure that the distance betweenthe appliance and the cupboard front-edge is 44 mm.The lower hinge cover (in t

8. Disconnect the parts (Ha), (Hb), (Hc)and (Hd).HaHbHcHd9. Install the part (Ha) on the inner side ofthe kitchen furniture.ca. 50 mmca. 50 mm21 mm21

12. Align the kitchen furniture door and theappliance door by adjusting the partHb.Hb13. Press the part (Hd) on the part (Hb).HbHdDo a final check to

electrolux 15

222341934-A-462010 www.electrolux.com/shop

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety information 2Control panel 4First use 5Daily use 6H

damage to the cord may cause a short-circuit, fire and/or electric shock.Warning! Any electrical component(power cord, plug, compressor) mustbe replac

•Connect to potable water supply only. 4)Service• Any electrical work required to do theservicing of the appliance should be car-ried out by a qualifi

Functions MenuEach time Function button is pressed, thefollowing functions are activated in a clock-wise direction:• Action Freeze function• no symbol

DAILY USEFreezing fresh foodThe freezer compartment is suitable forfreezing fresh food and storing frozen anddeep-frozen food for a long time.To freez

• it is advisable to show the freezing in dateon each individual pack to enable you tokeep tab of the storage time.Hints for storage of frozen foodTo

WHAT TO DO IF…Warning! Before troubleshooting,disconnect the mains plug from themains socket.Only a qualified electrician or compe-tent person must do

Problem Possible cause Solution The door is not closed correctly. Refer to "Closing the door". The temperature regulator is notset correct