
2. Pull the rear shelf support rail away from
the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
Cleaning the oven door
To make the cleaning easier remove the oven
door..
Warning! Make sure that the glass
panels are cool, before you clean the
glass door. There is risk that the glass
breaks.
Warning! When the door glass panels
are damaged or have scratches, the
glass becomes weak and can break. To
prevent this you must replace them. For
more instructions, contact your local
Service Centre.
Removing the oven door and the glass
panel
1. Open the door fully and hold the two door
hinges.
2. Lift and turn the levers on the two hinges.
3. Clean the glass panel with water and
soap. Dry it carefully
Warning! Only clean the glass panel
with water and a soap. Abrasive
cleaning agents, stain removers and
sharp objects (e.g. knives or scrapers)
can cause damage to the glass.
When the cleaning procedure is completed,
insert the oven door. To do so, do the steps
in opposite way.
Stainless steel or aluminium appli-
ances:
Clean the oven door with a wet sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel
with the same precautions
Oven lamp
Warning! There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
electrolux 13
Kommentare zu diesen Handbüchern