
5.9 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
The function does not stop the timer
functions.
To activate the function: touch
.
comes on.
To deactivate the function: touch
.
The previous heat setting comes on.
If you change the heat
setting, the function stops
and the display shows the
new heat setting.
5.10 Lock
You can lock the sensors on the hob
while cooking zones operate.
Set the heat setting first.
To activate the function: touch
.
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch .
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
5.11 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: the hob must
be deactivated. Touch for 4 seconds
until flashes. Touch . comes on for
4 seconds.
To deactivate the function: the hob
must be deactivated. Touch for 4
seconds until flashes. Touch .
comes on for 4 seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch for 4 seconds
until
comes on for all zones. Set the
heat setting in 4 seconds. You can
operate the hob. When you deactivate
the appliance the function operates
again.
5.12 Power management
function
• Cooking zones are grouped according
to the location and number of the
phases in the hob. See the illustration.
• Each phase has a maximum
electricity load.
• The function divides the power
between cooking zones connected to
the same phase.
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase is
exceeded.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
www.electrolux.com14
Kommentare zu diesen Handbüchern