Electrolux EXP09HN1W6 Bedienungsanleitung PDF herunterladen (Seite 29)

29ENGLISH

4.3 Installation in a double-hung

sash window

The hose can be extended from its original

length of 38.1cm up to 139.7cm, but it is

the best to keep the length to minimum

required. Also make sure that the hose

does not have any sharp bends or sags.

(Fig. 11)

150mm

Wall

adaptor

Screws

& Wall

Plugs

Max 48"

Min 12"

Fig. 10

Fig. 13

Fig. 14

Fig. 15

Fig. 11

Fig. 12

1. Cut the foam seals(adhesive type) to the

proper lengths and attach them to the

window and stool. (Fig. 12)

2. Open the window sash and place the

window slider kit on the window stool

(Fig. 13). Attach the window slider kit to

the window stool. Adjust the length of

the window slider kit according to the

width of window. Screw down the two

screws on the window slider kit. See

Fig.13. Cut the adjustable window slider

kit if the width of window is less than

26.6 inches (Fig. 14).

3. Close the window sash securely against

the window slider kit. (Fig. 15)

4. Drive two 1/2" screws to secure the

window slider kit to the window sash.

(Fig. 15)

5. Secure the window slider kit to the

window stool (Fig. 15):

A: For wooden windows: Use 3/4" screws

for securing.

B: For Vinyl-Clad windows: Use 1/2" hex

head cap screws for securing.

Foam seal A

(adhesive type)

screws

Window slider kit

Window stool

26.6"~48.5"

Window slider kit

3/4" screws or 1/2"

hex head cap screws

Window stool

1/2" screws

4.2 WALL DISCHARGE

Mount wall adaptor directly over correctly

installed duct to outside. (This usually

includes aluminum wall ducting & an

outside cover. See your hardware

specialist for correct installation.) Use wall

plugs & screws to secure. (Fig. 10) Attach

hose duct to wall adaptor.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 199 200

Kommentare zu diesen Handbüchern

Keine Kommentare