Electrolux IHPL1240WE Bedienungsanleitung Seite 5

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 176
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 4
5
ENGLISH
3. MAINTENANCE
- The Activated charcoal lter is
not washable and cannot be re-
generated, and must be replaced
approximately every 4 months of
operation, or more frequently for
particularly heavy usage (W).
WW
- The Grease lters must be cleaned
every 2 months of operation, or
more frequently for particularly
heavy usage, and can be washed
in a dishwasher (Z).
ZZ
- Control lights, if present.
Clean the hood using a damp cloth
and a neutral liquid detergent.
4. CONTROLS

   
Button Function Led
L Turns the lights on/off at maximum strength. -
Press and hold the button for approximately 2 seconds to turn the Courtesy Lights On/
Off.
-
T1 Turns the motor on/off at speed one. Fixed.
T2 Turns the Motor on at speed two. Press and hold the button for approximately
5 seconds, with all the loads turned off (Motor and Lights), to turn the Activated
Charcoal Filter alarm on. The relevant LED ashes twice to conrm. To turn the
alarm off, press the button again and hold for at least 5 seconds. The relevant
LED ashes once.
Fixed.
T3 Turns the Motor on at speed three. Press and hold the button for approximately
3 seconds, with all the loads turned off (Motor and Lights), to perform a reset.
The LED S1 ashes three times.
Fixed.
T4 Turns the Motor on at INTENSIVE Speed. This speed is timed to run for 6
minutes. At the end of this time, the system returns automatically to the speed
that was set before. If it is activated with the motor turned off, the hood will
switch to OFF at the end of the time. Press and hold for 5 seconds to enable
the remote control, indicated by the LED ashing twice. Press and hold for 5
seconds to disable the remote control, indicated by the LED ashing just once.
Fixed.
S1 Signals the Metal Grease Filter saturation alarm, indicating that it is necessary
to wash the lters. The alarm is triggered after the Hood has been in operation
for 100 working hours.
Fixed.
When this is activated, it signals the Activated Charcoal Filter saturation alarm,
indicating that the lter must be changed; the Metal Grease Filters must also
be washed. The Activated Charcoal Filter saturation alarm comes into operation
after the Hood has been working for 200 hours.
Flashing.
Seitenansicht 4
1 2 3 4 5 6 7 8 9 10 ... 175 176

Kommentare zu diesen Handbüchern

Keine Kommentare