Electrolux EHT632X Bedienungsanleitung

1Model No. EHT632 XProduct No 949 600 562Serial No.INSTRUCTION BOOKGB AUS NZL

10Cleaning of gas burnersClean the control panel and knobs plus the pan grid, as well as burner caps and rings, with ordinary cleansing agents.Never u

11MountingThis appliance must be installed by anauthorised person. This appliance shall be installed inaccordance with the manufacturer'sinstalla

12Any adjoining wall surface situatedwithin 200 mm from the edge of anyhob burner must be a suitable noncombustible material for a height of 150 mm fo

13Gas installationThe appliance is factory set for Natural Gas. Fit the gas regulator supplied with the appliance to the gas inlet. The location of th

14Use of Hose Assemblies.If the appliance is to be installed using a hose assembly, then1. The hose must be AGA certified to AS/NZS 1869 as class

15Before leavingThe pipe connections should bechecked for leaks with soap andwater. Do not use a naked flamefor detecting checks.Test all burners on h

16Radio-noise reductionThis unit observes the current EEC-directive on radio noise reduction.Material: Stainless steel, ceramicglassPansupport: Castir

17ServiceSympton: There is no spark when lighting the gas?When the operating knob is released the gas ring goes out again?The gas ring burns very unev

18ELECTROLUX WARRANTY AUSTRALIANothing in this warranty, limits any rights you may have under the Trade Practices Act or any other Commonwealth or Sta

1910 This warranty does not cover loss, damage or expense to this appliance caused directly or indirectly by power surges, elec

2Contents Page noFor the userSafety information ... 3Description

20ELECTROLUX APPLIANCE WARRANTY –NEW ZEALANDThis appliance is warranted by Electrolux Home Products (NZ) Ltd (“the Company”) from the date of purchase

2111 The Company (and any company related to the Company) will not be liable for any special incidental or consequential damages

22

23

24325 88-7560 Rev. 4-250

3These warnings are provided in theinterests of your safety. Ensure youfully understand them before installing or using the appliance. Your safety is

4ServiceRepairs carried out byinexperienced persons may causeinjury or serious malfunction of theappliance. Repairs must only becarried out by an auth

5Description of the productBurnerControl knobAir intake

6Burner markingsSigns at each operating knob indicate which burner is to be adjusted with the knob in question.Back BurnerFront burnerPanel markingsEa

7Burner cover/burner ringTogether with the burner ring the burner cover forms a space where the final mixture of gas and air takes place in order to m

81. Depress and turn the control knob for the burner to the left to max. flame . (Ignition position)2. The ignition electrode will emit

9Maintenance and cleaningStainless steel surfacesPerform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid scouring cr