Electrolux SC300 Bedienungsanleitung PDF herunterladen (Seite 16)

8.7 Door reversibility

WARNING!

Before carrying out any

operations, remove the plug

from the power socket.

1. Remove the ventilation grille.

Remove the upper filling and install it

on the opposite side of the grille.

2. Lay down the appliance back side

down on a wooden support.

3. Unscrew the handle from the bottom

and the top of the door (1, 3) and the

screw on top of the handle (2).

1 2 3

4. Unscrew the hinge (1) and remove

the cover plate (2).

5. Remove the support (3) and install

the cover plate and hinge on the

opposite side. Install the support on

the opposite side.

1

3

2

6. Unscrew and move the lower hinge

(1).

7. Move the pin to the opposite side (2).

8. Unscrew the support (3).

9. Screw on the lower hinge and the

support on the opposite side (4, 5).

10. Tighten the pin with the adjustment

spanner supplied.

3

4

5

1

2

11. Install the handle on the opposite

side.

12. Raise the appliance and install the

ventilation grille.

13. Put the cabinet in position.

CAUTION!

Reposition, level the

appliance, wait for at least

four hours and then connect

it to the power socket.

Do a final check to make

sure that:

• All screws are tightened.

• The magnetic seal

adheres to the cabinet.

• The door opens and

closes correctly.

If the ambient temperature is

cold (i.e. in Winter), the

gasket may not fit perfectly

to the cabinet. In that case,

wait for the natural fitting of

the gasket.

In case you do not want to

carry out the above

mentioned operations,

contact the nearest

Authorised Service Centre.

The Authorised Service

specialist will carry out the

reversibility of the doors at

your cost.

www.electrolux.com16

1 2 ... 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare