Electrolux EXP09HSECI Bedienungsanleitung PDF herunterladen (Seite 18)

18 www.electrolux.com

• Dirty air lter - air restricted� Clean air

lter�

• Outside temperature extremely hot� Set

FAN speed to a faster setting to bring air

through cooling coils more frequently�

Room too cold.

• Set temperature too low� Increase set

temperature�

10. ADDITIONAL INFORMATION

Transport of equipment containing

ammable refrigerants

Disposal of equipment using

ammable refrigerants

Marking of equipment using signs

Storage of equipment/appliances

Storage of packed (unsold) equipment

Information on servicing

See transport regulations

See national regulations�

See local regulations

The storage of equipment should be

in accordance with the manufacturer’s

instructions�

Storage package protection should be

constructed such that mechanical damage

to the equipment inside the package will

not cause a leak of the refrigerant charge�

The maximum number of pieces of

equipment permitted to be stored together

will be determined by local regulations�

1. Checks to the area� Prior to beginning

work on systems containing ammable

refrigerants, safety checks are necessary

to ensure that the risk of ignition is

minimised� For repair to the refrigerating

system, the following precautions shall

be complied with prior to conducting

work on the system�

2. Work procedure� Work shall be

undertaken under a controlled

procedure so as to minimise the risk of a

ammable gas or vapour being present

while the work is being performed�

3. General work area� All maintenance

staff and others working in the local

area shall be instructed on the nature

of work being carried out� Work in

conned spaces shall be avoided� The

area around the workspace shall be

sectioned off� Ensure that the conditions

within the area have been made safe by

control of ammable material�

4. Checking for presence of refrigerant�

The area shall be checked with an

appropriate refrigerant detector prior

to and during work, to ensure the

technician is aware of potentially

ammable atmospheres� Ensure that

mode� Then, set temperature to a higher

setting�

• Exhaust duct not connected or blocked�

See 5�1 Exhausting hot air Section�

Air conditioner cooling, but room is

too warm - ice forming on cooling coil

behind decorative front

Air conditioner turns on and off

rapidly.

• Dirty air lter - air restricted� Clean air

lter� Refer to 8� Care and Cleaning

section�

• Temperature is set too high� Set

temperature to a lower setting�

• Air directional louvers positioned

improperly� Position louvers for better air

distribution�

• Front of unit is blocked by drapes,

blinds, furniture, etc� - restricts air

distribution� Clear blockage in front of

unit�

• Doors, windows, registers, etc� open -

cool air escapes� Close doors, windows,

registers, etc�

• Unit recently turned on in hot room�

Allow additional time to remove “stored

heat” from walls, ceiling, oor and

furniture�

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 199 200

Kommentare zu diesen Handbüchern

Keine Kommentare