Electrolux EXS12HC2WI Bedienungsanleitung PDF herunterladen (Seite 15)

Test running

A: Lo packed valve B: Hi packed valve

C and D are ends of indoor unit connection.

CAUTION

Indoor unit

check point

Outdoor unit

check point

Cover

Fig.25

Gas leak check

1. Soap water method:

Apply a soap water or a liquid neutral detergent

on the indoor unit connection or outdoor unit

connections by a soft brush to check for leakage

of the connecting points of th piping. If bubbles

come out, the pipes have leakage.

Leak detector

Use the leak detector to check for leakage.

Perform test running after completing gas leak and electrical safety check.

The test running time should last more than 30 minutes.

1. Open the panel and lift the panel up to an angle which remains fixed. Do not lift the

panel any further when it stops with a click sound.

2. Press the manual control button twice until the operating indicator lights up, the unit

will operate on Forced Cool mode.

3. Check if all the functions works well during test running. Especially check whether

the drainage of indoor unit is smooth or not.

4. Press the manual switch button again . The operating

indicator turns dark and the unit stops operating.

after finishing the test running

TEST RUNNING

AUTO/COOL

Manual Control

Button

1 2 ... 10 11 12 13 14 15 16

Keine Kommentare

Electrolux EXS12HC2WI Bedienungsanleitung Seite 15