Electrolux TY58TCICN Bedienungsanleitung PDF herunterladen (Seite 25)

installation proud of the work surface electrolux 25

Installation proud of the

work surface

Sticking on the seal

• If installing proud of the work sur-

face, use the sealing tape with di-

mensions 16x2 mm.

• Clean the worktop in the area of the

cut-out.

• Cut the one-sided self-adhesive

sealing tape supplied into four parts

according to the edge length of the

cut-out and stick to the worktop

along the edge of the cut-out.

• In doing so, the sealing tape should

protrude by approx. 3 mm over the

edge of the appliance on all sides.

• Do not stretch the sealing tapes

when sticking. Do not stick the ends

on top of each other, these should

be pushed against each other.

• After fitting the Teppan Yaki (using

the provided fitting material), the

overlaying sealing tape must be cut

away on all sides using a sharp knife.

Take care not to damage the work-

top.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Keine Kommentare

Electrolux TY58TCICN Bedienungsanleitung Seite 25