Electrolux EB4GL70SP Bedienungsanleitung PDF herunterladen (Seite 19)

1. Put 250 ml of water with 3

tablespoons of vinegar directly into

the steam generator.

2. Turn on the function: Steam

Cleaning.

The display shows the duration of the

function. An acoustic signal sounds when

the programme is completed.

3. Touch any symbol to turn off the

signal.

4. Wipe out the appliance with a soft

cloth. Remove the water from the

steam generator.

Let the appliance dry fully with the door

open for approximately 1 hour.

To speed up the drying you can close the

door and heat up the appliance with the

function: True Fan Cooking at

temperature 150°C for approximately 15

minutes.

12.4 Steam generation system

CAUTION!

Dry the steam generator

after each use. Remove the

water with the sponge.

Remove the limescale with

water and vinegar.

CAUTION!

Chemical de-scaling agents

can cause damage to the

enamel. Follow the

instructions of the

manufacturer.

1. To clean the water drawer and the

steam generator, put the water and

vinegar mixture (approximately 250

ml) through the water drawer into the

steam generator. Wait for

approximately 10 minutes.

2. Remove the water and vinegar with

the sponge.

3. Put clean water (100 - 200 ml) into

the water drawer to flush the steam

generation system.

4. Remove the water from the steam

generator with the sponge and rub it

dry.

5. Keep the door open to let the

appliance dry fully.

12.5 Removing and installing

the door

You can remove the door to clean it.

WARNING!

The door is heavy.

1. Open the door fully.

2. Fully press the clamping levers (A)

on the two door hinges.

A

A

3. Close the door until it is at an angle

of approximately 45°.

45°

4. Hold the door with one hand on each

side and pull it away from the

appliance at an upwards angle.

5. Put the door with the outer side down

on a soft cloth on a stable surface.

6. Clean the glass panel with water and

soap. Dry the glass panel carefully.

When the cleaning is completed, install

the door. Do the above steps in the

opposite sequence.

12.6 Replacing the lamp

WARNING!

Risk of electric shock.

The lamp can be hot.

1. Turn off the oven.

Wait until the oven is cooled down.

2. Disconnect the oven from the mains.

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare