Electrolux FAC124P1A Betriebsanleitung PDF herunterladen (Seite 32)

Section 2 Installation

2-2

C. Once the panel has been installed on the side

of the cabinet, make sure it sits securely inside

the frame channel by making slight adjustments.

Slide the top and bottom ends of the frame into

the top and bottom rails of the cabinet.

D. Slide the panel all the way in and repeat on the

other side.

2. Keep a firm grip on air conditioner, then carefully

place the unit into window opening so the bottom of

the air conditioner frame is against the window sill

(See Figure 2-5). Carefully close the window behind

the top rail of the unit.

3. Extend the side panels out against the window frame

(See Figure 2-6).

4. Place the frame lock between the frame extensions

and the window sill as shown (See Figure 2-6). Drive

3/4” (19 mm) locking screws through the frame lock

and into the sill (See Figure 2-6).

5. Drive 1/2” (13 mm) locking screws through frame

holes into window sash (See Figure 2-7).

6. To secure lower sash in place, attach right angle

sash lock with 3/4” (19 mm) screw as shown

(See Figure 2-8).

7. Cut foam seal and insert in the space between the

upper and lower sashes.

Inside Outside

Window Sill

Bottom Rail

Figure 2-3.

Figure 2-4.

Figure 2-5.

Figure 2-8.

Figure 2-6.

Figure 2-7.

If storm window blocks AC, see Figure 2-9.

NOTE

To prevent window sill from splitting, drill 1/8” (3 mm)

pilot holes for screws

NOTE

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 139 140

Keine Kommentare

Electrolux FAC124P1A Betriebsanleitung Seite 32