Electrolux FAC124P1A Betriebsanleitung PDF herunterladen (Seite 87)

Section 4 Component Teardown

4-27

Condenser Fan Blade and Shroud Removal

To remove the condenser fan blade and shroud:

1. Disconnect power supply from unit.

2. Remove the front panel assembly. Pull the unit from

the cabinet wrapper/sleeve.

3. Remove the condenser fan assembly from the unit.

4. Use a 13 mm socket or wrench and remove the left

hand thread nut securing the condenser fan blade to

the motor shaft. (See Figure 4-68)

5. Pull the lock washer and washer from the motor

shaft, then pull the fan blade from the motor shaft.

6. With the fan blade removed, the condenser fan

shroud can be removed from the condenser fan

assembly.

Fan Motor Removal

To remove the fan motor:

1. Disconnect power supply from unit.

2. Remove the front panel assembly. Pull the unit from

the cabinet wrapper/sleeve.

3. Remove the condenser fan assembly from the unit.

4. Remove the blower wheel and fan blade.

5. Use a 10 mm socket or wrench and remove the

three nuts securing the condenser fan motor to

the right partition bulkhead. Lift condenser off

mounting studs. (See Figure 4-69)

Compressor Removal

To remove the compressor:

1. Disconnect power supply from unit.

2. Remove the front panel assembly. Pull the unit from

the cabinet wrapper/sleeve.

3. Attach an approved self tapping line tap valve to the

process tube. Connect refrigerant recovery system

to tap valve. Turn on recovery system, open the

line tap valve, and allow refrigerant to flow into an

approved tank. (See Figure 4-70)

4. Disconnect the compressor inlet line above the

accumulator. Disconnect discharge line one inch

from the outlet.

5. Use a 13 mm socket or wrench and remove the 3

nuts securing the compressor to the unit base.

6. Remove the compressor electrical components by

using an 8 mm socket or wrench and remove the nut

securing the cover to the top of the compressor.

Figure 4-68.

Figure 4-69.

Figure 4-70.

10mm Nuts

13 mm Nut

13 mm

Nuts

Process Tube

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux FAC124P1A Betriebsanleitung Seite 87

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen Electrolux FAC124P1A