Electrolux SM 554 Wartungshandbuch PDF herunterladen (Seite 14)

Service

Manual

9406

• During water inlet the timer will hold. It will restart

when the level switch opens to indicate that the

water level in the drum has been reached.

• Hot and/or cold water may be programmed "Inlet".

• Use the facility to reduce the heating time by

programming hot water or mixed cold and hot

water filling.

• During "Heating" the timer will hold. It will restart

when the thermostat opens to indicate that the

selected temperature has been reached.

• By cutting track detergent must NOT be dispensed

during heating.

• Cold water enters the machine during

programming. "Cooling". This provides a cooling of

3-4°/minute.

• The last punched peg in a sub routine determines

where the first one of the next sub routine should

be punched. For example, if the first rinse ends

with a spin punch in peg 38 the second rinse starts

with cold water filling peg 39.

• If there are no punched pegs, the advane of the

automatic card device stops. This means a row

cannot be left unpunched during a programme, the

programme must be a complete sequence with

information about the washing process.

• Programming of "Stop" can be made serveral time

during the same washing programme. When the

programme reaches the stop the buzzer sounds

and the machine stops. It is then possible to carry

out required action such as detergent dispensing.

When restart is required press the restart button

and the washing process continues in accordance

with the programme.

PLEASE NOTE

Ensure that the programme card does not come in

contact with detergent or any other substance

which could cause interference in the programme.

Detergent on the card may coat the microswitches

and can cause them to fail or may deposit a layer of

detergent on the advance reels thus increasing their

diameter. As a result, they will press the programme

card harder against the micro switches which in turn

may interpret this as the presence of a peg even

when the peg has been removed. The required

function may start later or may be completely absent.

5. Card Programming

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 90 91

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux SM 554 Wartungshandbuch Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Electrolux SM 554