Electrolux SM 554 Wartungshandbuch PDF herunterladen (Seite 57)

Service

Manual

9406

The machine does not fill with water

• Check that the nipple on the underside of the level

control is not blocked. A blockage can be caused

by residual pressure below the level control's

membrane indicating incorrectly that a level has

been reached.

• Check the level control's function as follows:

– Connect a measuring instrument across the

terminal pin.

– Remove the hose from the drain valve.

– Blow carefully into the hose and check the

terminal's function with the measurement

instrument.

• The machine not filling with water can also be

caused by burnt contacts. Replace the level control

if this is the case.

Replacing the levelcontrol

Identify the connections, i.e. by marking, so that they

can be connected to the correct pins.

• Clear the hose with compressed air before the new

level control is fitted.

• There must be no water in the machine when the

control is replaced.

26. Level control

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 90 91

Keine Kommentare

Electrolux SM 554 Wartungshandbuch Seite 57