Electrolux SM 554 Wartungshandbuch Seite 77

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 91
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 76
Service
Manual
9406
X90:1
X90:2
X91:1 X91:2
X92:2
X92:3
X72:7 X72:4
L1 N
X93:3
X95:2X95:1X93:2
X193:1
X193:2
FLE MP FC (Machines with frequency controlled motor)
Description
The rotation guard checks that the machine is completely at a standstill before the
door can be opened. When the drum has been at a standstill for approx. two seconds
the solenoid in the door lock is deactivated and the lock can be opened (provided that
the machine has been emptied of water and the programmer has reset). The rotation
guard also checks that the drum is revolving when the wash or extraction relays are
operating.
The rotation guard consists of a circuit board in the automatic control unit and a
sensor in a holder on the machine rear. There is a magnet on two of the spokes of the
pulley. Each time a magnet passes the sensor, a contact closes inside the sensor and
it relays a pulse to the rotation guard.
When the machine is at a standstill the rotation guard relays K1 and K2 are closed,
which means that the delay unit and the FL-MP receive confirmation that the drum is
not moving, i.e. the rotation guard and the FL-MP allow door opening.
31. Speed Guard
31
2
2
2436
2019
Fuse F1
X91
X92 X93
X94
X90
LED
X95
X96
X99
To control
circuits
This circuit is not used in FLE MP
Fig.
2
Logic section
Pulses from B41: K1 and K2 change
immediately.
No pulses from B41: K1 and K2 operate after
approx. 2 sec
Seitenansicht 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 90 91

Kommentare zu diesen Handbüchern

Keine Kommentare