Electrolux SM 554 Wartungshandbuch PDF herunterladen (Seite 73)

Service

Manual

9406

30. Motor

Repair instructions

Overheated motor, motor not running

• Wait till motor has cooled down. Motor guards

are automatically reset after 30 minutes. Restart.

• Possible cause of motor gurads releasing

repeatedly: short circuiting. In both cases the

motor should be replaced.

Very noisy motor

• Breakdown of bearings – replace motor.

Motor running slowly

The motor is probably running on two phases –

measure coils on terminal.

Wash motor only runs at one of the speeds

• Check that the quick connection is correctly

connected.

• Measure coils on plinth, as the fault can be

caused by interruption in one of the coils.

Motor locks

Breakdown of bearings – replace motor

Motor does not turn

• Check belt tension.

When checking the belt tension or when changing

belt, follow the instructions shown.

NOTE!

Checking the belt tension should always be a

part of the regular maintenance.

FLE/FLE MP

• Belt between the wash motor and extraction

motor. Release and adjust backing plate to

correct belt tension according to illustration.

Fasten plate.

• Belt between extraction motor and wash drum.

Remove screws for the attachment of motor

bridge at extraction motor side, lower motor

bridge to correct belt tension according to

illustration and fasten bridge.

120 220

F 30 N 30 N

max

12 mm 12 mm

min

10 mm 10 mm

2311

2434

FLE MP FC

FLE/FLE MP

Fig.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 90 91

Kommentare zu diesen Handbüchern

Keine Kommentare

Electrolux SM 554 Wartungshandbuch Seite 73

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Electrolux SM 554